Plasma Cloud PA300E Access Point
Plasma Cloud’s low cost solution providing single band dual stream 2.4GHz 802.11n WiFi in a weather resistant housing. Your best choice if the budget is a concern or for large WiFi sensor deployments.
POWER OVER ETHERNET (POE)
Power over Ethernet (PoE) allows to supply a device with power and data over a single Ethernet cable connection. This reduces installation cost and effort for locations without available power lines. Furthermore, when connected to a Plasma Cloud PoE switch, PoE allows to centrally manage & monitor the power supply.
The 2 provided Ethernet ports allow for maximum flexibility: one port can be used as wired uplink while the other port serves as LAN access for other wired devices. Each Ethernet port comes with a smart uplink detection to automatically determine whether a port should be an uplink or provide LAN access.
Regardless of where you want to install the access points – on a wall, ceiling grid, pole, outdoors – the installer kit included with every Access Point facilitates the installation. Easily pluggable mounting options have got you covered for every scenario.
- 2.4 GHz 802.11n WiFi
- Two external antennas
- Zero config, plug-and-play networking
- Free cloud-based web console for complete management
- Water and dust resistant with an IP55 rating
- Universal installation kit included
PLASMA CLOUD ACCESS POINT RADIO CHAINS/STREAMS 2.4 GHz : 2x2 ANTENNAS 2.4 GHz : 3.0 dBi (via external RP-SMA connector) DATA RATES 300 Mbps 2.4 GHZ 2 stream, 802.11 b/g/n (max rate: 300 Mbps) PROCESSOR Qualcomm Honeybee QCA9351 MEMORY 64 MB PHYSICAL INTERFACE 2x 100Mbps Ethernet Ports POE 24v Passive PoE 802.3af / 802.3at DC JACK 12-24V / 1A INDOOR/OUTDOOR RATING CE Marked for indoor/outdoor use, IP55 DIMENSION (W X D X H) 142 x 142 x 35 mm WEIGHT 470g OPERATING TEMPERATURE 0°C ~ 40°C (32°F ~ 104°F) WARRANTY 1 year